|
|
|
||||||||
|
What is a expandable ring shank? The shank of a ring is the lower part, the part that is generally not seen unless the ring twists and turns on the finger. A ring with a conventional fixed shank must be made large enough to go over your "knuckle" (finger joint) regardless of how enlarged the knuckle is. This makes the ring too large in the wearing position, causing it to twist and turn on your finger. |
 |
||||||||
|
|||||||||
|
How does it work?
The
Finger Mate shank opens automatically when the ring is pulled from the top and
locks closed when its sides are squeezed together. Its 2-position catch allows
for a half-size adjustment when needed. There are no buttons to push, nor are
there any dangling flaps to engage. The special safety spring allows the shank to
open 3 - 4 sizes, but prevents it from opening fully, securing the ring from
loss if the catch is not locked. Is it safe? Absolutely! The two-position locking mechanism not only provides an extra margin of safety, but it also provides relief if the ring should become too tight on particularly hot or muggy days. Furthermore, a concealed spring prevents the ring from opening too far. There is always a continuous band surrounding the finger. How can I see it?
Any Finger Mate dealer can demonstrate our
expandable ring shank and provide an estimate to attach it to your rings. Click
here to find a dealer near you. Or, have your jeweler contact us for an
information kit. Is it guaranteed?
All
Finger Mate products come with an Exclusive Limited Warranty* on the Catch and Spring. It provides
that should the Catch and Spring EVER fail, for any reason, it will be replaced
for just a service charge.
*Full copy of Warranty available on request.
|
|||||||||
|
Copyright © 2012 Finger Mate, Inc. All rights reserved.
|
|||||||||
